High Voltage Modulators
H6 systems high voltage modulators provide electrical pulses used primarily in generating high power RF. They are compact and can be controlled through a 25 pin dsub connector or through a Modbus connection. They monitor faults and protect against harmful operator input.
High Voltage Modulators
Filament warmup is fully supported with an internal power supply and control system. Pulse timing can be generated internally or provided from an external source. Modulators at 1.5 megawatts or lower are air cooled while systems above 1.5 megawatts are liquid cooled. Give H6 Systems a call to discuss your application.
Modulator : H6-300
RF Peak Power: 300 kW
Peak Voltage: 25 kV
Peak Current: 30 amps
Duty: .001
Cooling: Air
Control: Ethernet/modbus or Dsub
Modulator: H6-1000
RF Peak Power: 1 MW
Peak Voltage: 43 kV
Peak Current: 70 amps
Duty: .001
Cooling: Air
Control: Ethernet/modbus or Dsub
Modulator : H6-3000
RF Peak Power: 3 MW
Peak Voltage: 65 kV
Peak Current: 100 amps
Duty: .001
Cooling: Air or liquid
Control: Ethernet/modbus or Dsub
Modulator : H6-5000
RF Peak Power: 5 MW
Peak Voltage: 75 kV
Peak Current: 145 amps
Duty: .001
Cooling: Air or liquid
Control: Ethernet/modbus or Dsub
Modulator : H6-8000
RF Peak Power: 8 MW
Peak Voltage: 155 kV
Peak Current: 140 amps
Duty: .03
Cooling: Liquid
Control: Ethernet/modbus or Dsub
Modulator : H6-28000
RF Peak Power: 28 MW
Peak Voltage: 280 kV
Peak Current: 270 amps
Duty: .03
Cooling: Liquid
Control: Ethernet/modbus or Dsub
Modulator : H6-49000
RF Peak Power: 49 MW
Peak Voltage: 350 kV
Peak Current: 360 amps
Duty: .03
Cooling: Liquid
Control: Ethernet/modbus or Dsub